Our Products

Decor Dura Master Plaster is available in two types:

1. R3 Master Plaster: which can also be found in two types
   i) Simple texture wall finish that can be applied using a wood float.
   ii) Rough texture Master plaster with grits can be applied using a wood float.
2. R6 Master Plaster: A versatile wall coating that can be made into different designs e.g. horizontal finishes, spiral finishes, mazeras finishes etc. for an elegant wall finish.

Some of the advantages of using wall masters are; Easy to apply and shape into any texture, durability up to 13 years after application, economical as it doesn't require any mainte-nances, washes well in the rain and is graffiti resistant.

1. Easy to apply and shape into any texture.
2. Durability up to 13 years after application.
3. Leaves beautiful, appealing and elegant finishes.
4. Gives walls a good uplift.
5. Can also be used in beautifying ceilings and interior walls.
6. Multi purpose thus it can be applied on many surfaces.

Décor Dura Master plaster is first mixed with clean water i.e. 10 liters per 40Kgs of Master Plaster. It is then applied with a steel trowel to etched in textures and patterns. Other tools like the roller brushes are used to bring out textures and patterns too.

Takes 1 hour to dry up but at most 12 hours to harden.

Dependent on the thickness required by the architect or client and also dependent on the roughness or smoothness of the surface of application.
Standard rates are 8-10 sq. meters per 40kg.

Master plaster is supplied in white and can also be coated to any color upon the clients choice of color.

40 kg packs.

A high quality formulation made with a PVA Co-polymer. Has an opaque appearance that gives a clear, smooth film on application.

Transforms a matt finish into a clear, glossy finish that’s easily washable. It also seals air spaces on porous surfaces. Its easy o apply and can be easily thinned with water.

Shiny gloss finish. The shininess of the surface can be varied by the amount of water used when thinning before application.

Can be applied using a brush, spraying or by the use of a roller depending on the type of surface of application.

Dries fast and can be re-coated in 3-4 hours.

12 - 16m2 per liter when coated on a smooth non porous surface. Area covered will reduce relatively when applying on porous textured surfaces.

4 Liter packs.

Transco is readily available in hardware stores across the country.

By Spray, Roller or Brush, thoroughly clean surfaces using any mechanical means like wire brush cleaning or buffing wheel. Ensure a clean firm and dry surface before painting.

A matt finish with good durability ideal for walls and ceilings.

Suitable for application to well-prepared new plaster, concrete, porous brick works and various types of building boards.

Can also be used as a finishing coat to appropriately primed and undercoated wood or metals.

White (Other color available on order).

Matt.

12 minimum. However, practical spreading rate can vary.                                  This will depend on the number of coats required, Surface profile, application and weather conditions.

Thin with water (5-15%) by volume. Do not over thin.

High bonding power.

Easy to clean using water.

Quick drying and attractive finish

Apply using comb trowel.

This product is available in 25kg containers.

New formula incorporating a high-bonding solution.

4 hours.

2.5 M^sq per Kg

Thinning unnecessary, supplied ready for use.

Water

Shake well before use.

The turpentine is normally used as a solvent and a source of material for organic synthesis. As a solvent, Decor Dura turpentine is used in thinning oil-based paints and production of varnishes. As a source of material for organic synthesis, the turpentine is used for synthesis of fragrant chemical compounds. It is also used as an additive to cleaning and sanitary compounds.

This product is available in 500ml, 1 Liter and 5 liters packaging.

Turpentine is readily available in hardware stores across the country.